Microengineering Aerospace Systems

Henry Helvajian, editor

 


Chapter 1: Introduction to MEMS (cont.)

 

M. Mehregany and S. Roy

 

1.7    References

  1. J. Bardeen and W. H. Brattain, "The Transistors, a Semiconductor Triode," Phys. Rev. 74, 230 (1948); and W. Shockley, J. Bardeen, and W. H. Brattain, "Electronic Theory of the Transistor," Science 108, 678–679 (1948).
  2. C. S. Smith, "Piezoresistive Effect in Germanium and Silicon," Phys. Rev. 94 (April 1954).
  3. Micromachine Devices 1(2) (1996).
  4. E. M. Blaser, W. H. Ko, and E. T. Yon, "A Miniature Digital Pressure Transducer," 24th Annual Conference on Engineering in Medicine and Biology (Las Vegas, Nevada, November 1971), p. 211.
  5. W. H. Ko, M. H. Bao, and Y. D. Hong, "A High Sensitivity Integrated Circuit Capacitive Pressure Transducer," IEEE Trans. Elect. Dev. ED-29, 48–56 (1982).
  6. R. M. Finne and D. L. Klein, "A Water-Amine-Complexing Agent System for Etching Silicon," J. Electrochem. Soc. 114, 965 (1967).
  7. J. B. Price, "Anisotropic Etching of Silicon with KOH-H2O-isopropyl Alcohol," in Semiconductor Silicon, Second International Symposium on Silicon Materials Science and Technology (Electrochemical Society, Princeton, NJ,13–18 May 1973), pp. 339–353.
  8. H. C. Nathanson and R. A. Wickstrom, "A Resonant-Gate Silicon Surface Transistor with High Q Bandpass Properties" Appl. Phys. Lett. 7, 84 (1965).
  9. R. T. Howe, "Surface Micromachining for Microsensors and Microactuators," J. Vac. Sci. Technol. 16, 1809–1813 (1988).
  10. M. Mehregany, K. J. Gabriel, and W. S. N. Trimmer, "Integrated Fabrication of Polysilicon Mechanisms," IEEE Trans. on Electron Devices ED-35, 719–723 (June, 1988).
  11. L. S. Fan, Y. C. Tai, and R. S. Muller, "Integrated Movable Micromechanical Structures for Sensors and Actuators," IEEE Trans. on Electron Devices ED-35, 724–730 (June 1988).
  12. L. S. Fan, Y. C. Tai, and R.S. Muller, "IC-Processed Electrostatic Micro-motors," in Technical Digest, IEEE International Electron Devices Meeting (San Francisco, CA, December 1988), pp. 666–669.
  13. M. Mehregany, S. F. Bart, L. S. Tavrow, J. H. Lang, S. D. Senturia, and M. F. Schlecht, "A Study of Three Microfabricated Variable-Capacitance Motors," Sensors and Actuators A21-23, 173–179 (February–April 1990).
  14. K. E. Petersen, "Silicon as a Mechanical Material," IEEE Proc. 70, 420–457 (1982).
  15. J. Bhardwaj, H. Ashraf, and A. McQuarrie, "Dry Silicon Etching for MEMS," Proceedings of the Symposium on Microstructures and Microfabrication, Spring Meeting of The Electrochemical Society (Montreal, Quebec, Canada, May 1997).
  16. W. Ehrfeld et al., Proceedings of the IEEE Micro Robots and Teleoperators Workshop (Hyannis, MA, November 1987).
  17. H. Guckel, T. R. Christenson, K. J. Skrobis, D. D. Denton, B. Choi, E. G. Lovell, J. W. Lee, S. S. Bajikar, and T. W. Chapman, "Deep X-ray and UV Lithographies for Micromechanics," in Technical Digest, 1990 IEEE Solid-State Sensor and Actuator Workshop (Hilton Head, SC, June 1990), pp. 118–122.
  18. T. R. Ohnstein et al., "Tunable IR Filters Using Flexible Metallic Microstructures," Proceedings of the IEEE Micro Electro Mechanical Systems Workshop (Amsterdam, Netherlands, January 1995), pp. 170–174.
  19. H. Miyajima and M. Mehregany, "High-Aspect-Ratio Photolithography for MEMS Applications," IEEE Journal of Microelectromechanical Systems 4(4), 220–229 (December 1995).
  20. B. Lochel, A. Maciossek, H. J. Quenzer, and B. Wagner, "UV Depth Lithography and Galvanoforming for Micromachining," Proceedings of Second International Symposium on Electrochemical Microfabrication, 186th Meeting of The Electrochemical Society (Miami Beach, FL, October 1994).
  21. M. Despont, H. Lorenz, N. Fahrni, J. Brugger, P. Renaud, and P. Vettiger, "High-Aspect-Ratio, Ultrathick, Negative-Tone Near-UV Photoresist for MEMS Applications," Proceedings of the IEEE Micro Electro Mechanical Systems Workshop: MEMS '97 (Nagoya, Japan, January 1997), pp. 518–522.
  22. C. H. Ahn and M. G. Allen, "Fully Integrated Micromagnetic Actuator with a Multilevel Meander Magnetic Core," Technical Digest-IEEE Solid-State Sensor and Actuator Workshop (1992), pp. 16–18.
  23. A. Furuya, F. Shimokawa, T. Matsuura, and R. Sawada, "Micro-Grid Fabrication of Fluorinated Polyimide by Using Magnetically Controlled Reactive ion Etchine," Proceedings of the IEEE Micro Electro Mechanical Systems Workshop: MEMS '93 (Ft. Lauderdale, FL, February 1993), pp. 59–64.
  24. F. Shimokura, A. Furuya, and S. Matsui, "Fast and Extremely Selective Polyimide Etching with a Magnetically Controlled Reactive Ion Etching System," Proceedings of the IEEE Micro Electro Mechanical Systems Workshop (Nara, Japan, February 1992), pp. 192–197.
  25. L. Ristic, Sensor Technology and Devices (Artech House, Boston, 1994).
  26. R. G. DeAnna, M. Mehregany, and S. Roy, "Microfabricated Ice-Detection Sensor," Proceedings of the Conference on Smart Structures and MEMS, SPIE Symposium on Smart Structures and Materials (San Diego, CA, March 1997).
  27. Microelectromechanical Systems—A DOD Dual Use Technology Industrial Assessment, Defense Advanced Research Projects Agency, U. S. Department of Defense (1995).

 


Table of contents

Find more books



Home   Contact Us   FAQ  |   (options)
Copyright and Terms of Use, © 1995-2008 The Aerospace Corporation. All rights reserved. Send any questions or comments regarding this service to .

This page was last modified on 04/14/06